The Aspen Acres Fire started at 6 a.m. on June 29 in the hills between Pueblo and Custer counties, Colo. Driven by extreme winds, with gusts reported at up to 100 mph, it grew to more than 100,000 acres and became the seventh-largest wildfire in Colorado history. But acreage only tells insurers how much land burned. More important questions are what the fire reached, what it destroyed, and which policyholders now need help.
Those answers were much harder to pin down. Vexcel's post-fire aerial analysis identified 780 destroyed structures across Pueblo and Custer counties. That count included homes as well as garages, barns, sheds, and other buildings. A later assessment from county officials confirmed 319 homes destroyed. Meanwhile, incident officials reported approximately 850 structures lost. These figures can all be credible because they are measuring the damage differently. A county assessment focused on homes is answering a different question from an aerial survey counting every building on a property, and both can differ from information collected during an incident. The numbers also evolve as crews gain access to affected areas and assessments become more complete.
For insurers, that uncertainty creates a practical problem. Reserving, accumulation management, and claims decisions begin long before a final damage assessment exists. More importantly, the people behind those policies cannot wait weeks for every dataset to agree. They need to know when an adjuster is coming, whether temporary housing is available, when payments can begin, and how soon they can start rebuilding.
That is the clearest lesson from the 2026 wildfire season so far: Insurers need a strong view of wildfire risk before ignition because the information available after a fire will always take time to settle.
Understanding where exposure sits, how vulnerable individual properties are, and how fire is likely to move through a community helps insurers manage their portfolios. That same information can help them anticipate where claims are likely to emerge and get people on the ground faster when a fire occurs.
Colorado has already applied a similar principle to parts of the claims process. Following lessons from the Marshall Fire, insurers handling qualifying total wildfire losses must offer policyholders at least 65% of their contents coverage without requiring a detailed itemized inventory. Policyholders are also entitled to at least 24 months of additional living expense coverage. The reasoning is practical: families that have lost their homes should be able to begin recovering even when complete documentation is not immediately available.
Insurers should bring that same thinking to catastrophe preparedness. Perfect post-event information will take time. The better prepared an insurer is before ignition, the less dependent its initial response becomes on damage counts that are still changing.
Acres are a poor proxy for loss
The 2026 season has also reinforced how poorly burned acreage alone describes the severity of a wildfire from an insurance perspective. A fire can consume enormous areas of undeveloped land and produce relatively modest insured losses. Another can travel a much shorter distance through a populated community and destroy hundreds of properties.
The Spokane-area fires in August showed how quickly that can happen. Early in the event, more than 600 structures had already been reported destroyed while the fires had burned only a fraction of the land consumed by Aspen Acres. The numbers continued to develop as assessments progressed, but the contrast was already clear.
What determines loss is the relationship between the fire and the built environment: where the fire travels, how quickly it reaches exposed communities, how densely properties are situated, how individual structures are built, and what happens once fire enters a neighborhood. That is why two fires with dramatically different footprints can produce very different outcomes for insurers and the families they cover.
This matters for claims response as much as it does for underwriting. If an insurer has a detailed understanding of where its policyholders sit relative to an active fire and which properties are most exposed, it has a better chance of anticipating where claims will come from. Adjusters can be positioned closer to affected communities, outreach can begin sooner, and resources such as temporary housing and advance payments can be prepared before a complete structure count arrives.
For a homeowner who has just watched a neighborhood burn, those hours and days matter. The value of better catastrophe intelligence is ultimately measured not only in how accurately an insurer understands its accumulation, but also in how quickly that understanding can turn into help.
The loss picture lags the underwriting calendar
Timing creates another challenge. By early August, the National Interagency Fire Center had reported 44,722 fires burning more than 5.1 million acres across the United States. The country had reached National Preparedness Level 5, the highest level of wildfire response activity, as resources were concentrated across the West.
Yet the industry's first-half catastrophe reports offered little indication of what the wildfire season would ultimately cost. That is understandable. Aspen Acres started on June 29, only two days before the first half ended, and damage assessments continued well into July. The Spokane fires had not happened yet. Insurance reporting necessarily looks backward, while underwriting, accumulation management, and catastrophe preparedness have to look forward.
That gap matters because risk decisions do not stop while insurers wait for a season's losses to develop. Policies remain in force, renewals continue, capital is deployed, and insurers have to decide where they are comfortable taking additional exposure. The industry's view of wildfire therefore cannot depend primarily on what the previous fire season looked like or on loss numbers that become clear only after an event.
The better starting point is the information that can be understood in advance: where insured properties sit relative to vegetation and neighboring structures, the condition of defensible space, construction and roof characteristics, local weather and terrain, and how quickly a fire could move from wildland fuels into a community.
Better wildfire intelligence starts before the fire
There is no single dataset that can answer every wildfire question. But there are several areas where insurers can be more disciplined about the information they use.
The first is understanding what each damage number actually represents. Every structure-loss figure entering a model, reserve discussion, or board presentation should carry its definition, source, and method with it. An aerial assessment, an incident report, and a county count can each provide valuable information, but they should not be treated as interchangeable simply because they all contain a number labeled "structures."
The second is modeling wildfire at the resolution where property loss actually occurs. The wildland-urban interface is particularly important because fire behavior can change once flames and embers reach developed communities. Structure spacing, building characteristics, surrounding vegetation, and structure-to-structure ignition can all influence whether a wildfire remains primarily a vegetation event or becomes a major property catastrophe.
This is one area where wildfire science has advanced significantly. KatRisk's U.S. Wildfire Model, powered by Technosylva's operational fire science, models wildfire spread at 30-meter resolution across the continental United States and explicitly incorporates urban conflagration. The urban conflagration capability was developed in conjunction with CAL FIRE and PG&E and validated against recent major wildfire events, including the Palisades and Eaton fires.
For insurers, that level of detail can inform underwriting and accumulation management before an event. During a fire, the same understanding of hazard and exposure can help identify where policyholders may be affected and where claims resources are likely to be needed. The connection between those two uses is important: the information used to understand risk before ignition should also make the insurer better prepared to respond once the event begins.
Mitigation should be treated with the same level of rigor. A 2026 analysis highlighted by the California Department of Insurance found that rebuilding to the Insurance Institute for Business & Home Safety Wildfire Prepared Home Base standard could reduce modeled average annual loss by 31%. The Plus standard increased the reduction to 35%.
Those findings matter because mitigation affects both sides of the insurance equation. Lower expected losses can improve the economics of providing coverage in wildfire-exposed communities. For homeowners, effective mitigation increases the likelihood that the home survives the next fire and that a family never has to go through the claims and rebuilding process in the first place.
Better risk intelligence should lead to faster recovery
The 2026 wildfire season has not produced a U.S. wildfire catastrophe on the scale of the January 2025 Los Angeles fires. It has nevertheless exposed an important weakness in how wildfire severity is understood in real time. Acreage can tell us how large a fire became, but not what it destroyed. Structure counts provide a clearer picture of damage, but those counts can take weeks to stabilize and can mean different things depending on who collected them.
Insurers will always need post-event information, and that information will continue to improve as imagery, claims, and ground assessments come in. But the first hours and days after a catastrophe are precisely when insurers and policyholders have the least time to wait.
A stronger pre-ignition understanding of wildfire risk gives insurers a better foundation for underwriting, accumulation management, capital planning and catastrophe response. It can show where fires are most likely to start and spread, what they can reach, how individual structures are likely to perform, and where losses could concentrate.
For the insured, the benefit is much more immediate. It means an insurer that has a better idea of where help will be needed before the final damage count arrives. It means claims teams that can be deployed earlier, policyholders who can be contacted sooner, and families who can start the recovery process faster.
That is where better wildfire modeling ultimately proves its value. The industry needs to understand wildfire risk well enough before ignition that when a fire does happen, insurers are ready to make better decisions, and the people they insure are able to begin rebuilding their lives sooner.
